The Channel Master Antenna Rotator System is an easy to use, all in one
system that will enable the rotation of an outdoor antenna from an
indoor control box and a hand-held remote control. The indoor control
unit has internal memory which will allow the user to auto tune an
antenna to rotate to up to 69 pre-programmed positions. The Channel
Master Rotator System can be specifically helpful for those who use a
single outdoor antenna but are able to receive signals being broadcast
from towers in different directions. In addition to TV antenna use, the
Channel Master Rotator System is also popular among ham radio operators
and hobbyists for miscellaneous uses requiring remote rotation. The
motor and control unit are connected via a 3-conductor wire that carries
the electrical voltage and control signals from the indoor control unit
to the outdoor drive unit. (Rotator wire not included)
Tech specs
- Rotation 1 RPM
- Gear Ratio 3,200 to 1
- Accepts TV antenna mast up to 1.75" in diameter (upper mast)
- Power 120 V AC 60Hz
- Operating temperature -20 Degrees Celsius to + 55 Degrees Celsius
- Rotate torque up to 100 ft/lbs
- Driving torque up to 1,000 ft/lbs
- Overall height 10.25 in
- Lower motor drive housing 5.5 x 4.5 x 7 in
- Upper mast mount holes 2.125 in (center to center)
- Lower mast mount holes 2.25 in (center to center)
Box Contents
- Drive unit (Gray)
- Control unit (rotator wire not included)
- Power cable
- Remote control
Channel Master Handheld Remote Control Rotator System
- Brand: Channel Master
- Product Code: ANCM9521HD
- Availability: 2-3 Days
-
$299.00
Tags: Channel Master, Antenna Rotator System, all in one system, rotation of an outdoor antenna, indoor control box, hand-held remote control, indoor control unit, internal memory, auto tune an antenna, rotate to up to 69 pre-programmed positions, Channel Master Rotator System, use a single outdoor antenna, ham radio operators, hobbyists, remote rotation, motor and control unit, 3-conductor wire, (Rotator wire not included), Rotation 1 RPM, Gear Ratio 3, 200 to 1, Accepts TV antenna mast up to 1.75" in diameter (upper mast), Power 120 V AC 60Hz, , Operating temperature -20 Degrees Celsius to + 55 Degrees Celsius, Rotate torque up to 100 ft/lbs, Driving torque up to 1, 000 ft/lbs, Overall height 10.25 in, Lower motor drive housing 5.5 x 4.5 x 7 in, Upper mast mount holes 2.125 in (center to center), Lower mast mount holes 2.25 in (center to center), Drive unit (Gray), Control unit (rotator wire not included), Power cable, Remote control